The .458 diameter, 300 grain bullet has proven to be extremely accurate when used in Savage smokeless powder muzzleloaders. Sub-MOA accuracy is achievable at high velocities. Sabots must be purchased separately. The following loads were developed using the short, black Harvester sabot with a Savage Model 10ML. These loads are only valid with this combination.**********Lehigh Bullets assumes no liability in the use of this information. No warranty is expressed nor implied and you use this data at your own risk. If you do not agree to these terms, do not use this information.**********_______ SR-4759 42.0gr, average muzzle velocity 2,100fps_______VV N120 60.0gr, average muzzle velocity 2,277fps Sold in a packages of 50 at $65.00/box. Shipping via USPS Priorty Mail to the 50 states is included in the price.

Ten piece sample pack for $16.00. Shipping via USPS Priorty Mail to the 50 states is included in the price.

The .459 diameter bullet is being offered at a special, introductory price. The bullet is ideal for loose bore barrels. This is a continuation of the DOA muzzleloading bullet line. This bullet is ideal for elk and bear providing additional weight coupled with the DOA hollowpoint nose design. This is a premium machined bullet designed specifically for the advanced in-line muzzleloader looking for the best bullet available. To see the bullets performance in ballistic media, select the Information link on the home page and then Technical Data. Sabots must be purchased separately. Weight - 277 grains BC (calculated) - X.XXX Length - 0.990 Design velocity - 1,500- infinity and beyond Material - UNSC36000 brass Sold in a packages of 50 at $45.00/box. Shipping via USPS Priorty Mail to the l50 states is included in the price.

Ten piece sample pack for $12.00. Shipping via USPS Priorty Mail to the 50 states is included in the price.

The .308 Subsonic Controlled Fracturing was designed for outstanding terminal subsonic performance for suppressed bolt gun or single shot applications. The required barrel twist rate for stability with a muzzle velocity of 1,050 fps is 1:8. Testing has shown terminal performance is dramatically improved by inserting a .17 caliber payload bullet (not included) into the hollowpoint cavity. The hollowpoint was designed with a light .172 slip fit and the payload bullet can be retained with a small amount of epoxy. A 20 grain Berger appears to improve terminal performance over a 25 grain Hornady. The function of the payload bullet is to shift the cg forward and to direct the hydrostatic energy outwards accelerating the expansion. Weight - 150 grains (without payload bullet) BC G1 1,050 fps (calculated) - X.XXX Length - 1.235 Design velocity - 1,050 Material - UNSC36000 brass Sold in a packages of 50 at $60.00/box. Shipping via USPS Priorty Mail to the 50 states is included in the price.

The .338 Match Hybrid BoreRider is a premium match bullet specifically designed for the .338 Lapua and other .338 magnums for long range applications. The front etching band diameter is 0.336 and the rear driving band diameters are 0.3380. The required barrel twist rate for stability with a muzzle velocity greater than 2,800 fps is 1:11. The bullet is machined from UNSC36000 brass. The advanced projectile design and controlled manufacturing tolerances advance the accuracy potential of these cartridges. Weight - 245 grains BC (calculated) - 0.869 Length - 1.800 Design velocity - 2,800-3,500 Material - UNSC36000 brass Sold in a packages of 50 at $60.00/box. Shipping via USPS Priorty Mail to the 50 states is included in the price.

The .338 Match is a premium match bullet specifically designed for the .338 Lapua. The bullet is designed for magazine feeding with an overall cartridge length of 3.602. The required barrel twist rate for stability with a muzzle velocity greater than 2,800 fps is 1:12. The bullet is machined from UNSC36000 brass. The advanced projectile design and controlled manufacturing tolerances advance the accuracy potential of these cartridges. Weight - 230 grains BC (calculated) - 0.641 Length - 1.600 Design velocity - 2,800-3,500 Material - UNSC36000 brass Sold in a packages of 50 at $50.00/box. Shipping via USPS Priorty Mail to the 50 states is included in the price.

The .338 Subsonic Controlled Fracturing was designed for outstanding terminal subsonic performance for suppressed bolt gun or single shot applications. The required barrel twist rate for stability with a muzzle velocity of 1,050 fps is 1:8. Testing has shown terminal performance is dramatically improved by inserting a .17 caliber payload bullet (not included) into the hollowpoint cavity. The hollowpoint was designed with a light .172 slip fit and the payload bullet can be retained with a small amount of epoxy. A 20 grain Berger appears to improve terminal performance over a 25 grain Hornady. The function of the payload bullet is to shift the cg forward and to direct the hydrostatic energy outwards accelerating the expansion. Weight - 245 grains (without payload bullet) BC G1 1,050 fps (calculated) - X.XXX Length - 1.725 Design velocity - 1,050 Material - UNSC36000 brass Sold in a packages of 50 at $70.00/box. Shipping via USPS Priorty Mail to the 50 states is included in the price.