The 458-200 was designed to provide the sportsman with a single design for all game animals. From thorough expansion through deep penetration, this bullet does it all. Drop them where they stand! The advanced bullet design delivers exceptional accuracy with DOA terminal performance. Weight - 305 grains BC (calculated) - 0.197 Length - 1.100 Design velocity - 1,600-2,600 Material - UNSC36000 brass Sold in a packages of 50 at $65.00/box. Shipping via USPS Priorty Mail to the 50 states is included in the price.

The bullet is being released for orders on 1/9/09, but stock will not be available until mid-January 2009. The intent of the 458-300 was to create a fast fracturing bullet for personal defense and CQB applications to maximize terminal effect while minimizing potential secondary penetration. Well, it almost works! The terminal performance is simply unbelievable. At 3,000fps the bullet is a water-jug-vaporizing son of a gun. The problem lies in the amount of flash generated from the fast powders used to achieve the velocity. I use 40.0gr of Alliant 2400 in a 45-70 lever gun to achieve slightly over 3,000fps which results in a muzzle flash over ten feet long. You just can not believe how fast they cover 100 yards and they have shown to be very accurate in the several guns they have been tested in. There is virtually no recoil and the above load is just a riot to shoot. The bullet is made from aluminum and to eliminate the potential for aluminum oxide formation, the bullets are coated with a dry film lube immediately after they are cleaned. Weight - 100 grains BC (actual) - I still need to measure this; however, I can state it still has a lot of steam left at 100 yards. Length - 1.100 Design velocity - 2,000-?????!!!!! Material - 7075-T6 aluminum Sold in a packages of 50 at $50/box. Shipping via USPS Priorty Mail to the 50 states is included in the price.

The .458 Match Subsonic is a premium match bullet specifically designed for extreme range subsonic applications. There may also be high velocity applications as well, but at this point testing has not been done. The required barrel twist rate for stability with a muzzle velocity of 1,050 fps is 1:10. Weight - 582 grains BC G1 1,000 fps (calculated) - 0.629 /// BC G1 3,000 fps (calculated) - 1.105 Length - 2.414 Design velocity - 1,050 Material - UNSC36000 brass Sold in a packages of 50 at $90.00/box. Shipping via USPS Priorty Mail to the 50 states is included in the price.

The .458 Subsonic Controlled Fracturing was designed for outstanding terminal subsonic performance for suppressed bolt gun or single shot applications. The required barrel twist rate for stability with a muzzle velocity of 1,050 fps is 1:10. Testing has shown terminal performance is dramatically improved by inserting a .224 diameter payload bullet (not included) into the hollowpoint cavity. The hollowpoint was designed with a light .224 slip fit and the payload bullet can be retained with a small amount of epoxy. The payload bullet can be any manufacture with a weight equal to or greater than 50 grains. The function of the payload bullet is to shift the cg forward and to direct the hydrostatic energy outwards accelerating the expansion. Weight - 528 grains BC G1 1,050 fps (calculated) - 0.915 Length - 1.950 Design velocity - 1,050 Material - UNSC36000 brass Sold in a packages of 50 at $100.00/box. Shipping via USPS Priorty Mail to the 50 states is included in the price.

The 500-200 was designed to provide advanced terminal performance for the new .500 cartridges including the .500 Cyrus, .500 S&W(Encore rifle), and .50 Beowulf. The strong nose design and DOA technology provides incredible stopping power and exceptional penetration. Please note the ATF regulations specify this bullet can only be used in a rifle. Weight - 350 grains BC (calculated) - 0.136 Length - 0.950 Design velocity - 1,200-2,600 Material - UNSC36000 brass Sold in a packages of 50 at $70.00/box. Shipping via USPS Priorty Mail to the 50 states is included in the price.

The .510 Solid Ball brass bullet is an excellent alternative to those requiring accuracy far exceeding standard 50 BMG military ball projectiles. Minimal diameter variation and a consistent axis of rotation from a solid, machined projectile accounts for exceptional accuracy and group size in a fairly inexpensive bullet. Weight - 645 grains BC (calculated) - 0.684 Length - 2.100 Design velocity - 21,050-3,000 Material - UNSC36000 brass Sold in a packages of 100 at $115/box. Shipping via USPS Priorty Mail to the lower 48 states is included in the price. We can only ship .510 diameter bullets to a US address.

The .510 Match Hybrid, premium match bullet is designed for 50 BMG rifles with standard, hybrid, and borerider throats. This bullet is the first choice for those with a standard chamber. The front etching band is a 0.504 diameter and the rear driving band is 0.510 diameter. Weight - 800 grains BC (calculated) - 1.124 Length - 2.620 Design velocity - 2,500-3,000 Material - UNSC36000 brass Sold in a packages of 50 at $95.00/box. Shipping via USPS Priorty Mail to the 50 states is included in the price. We can only ship .510 diameter bullets to a US address.

The .510 Match BoreRider 808 Grain is the bullet used by Mark Avakian to set the current .510 BMG World Record 1,000 yard Aggregate of 5.8229 inches. Maybe you are the next record holder? The front etching band diameter is 0.5023 and the rear driving band diameter is 0.5105. Weight - 808 grains BC (calculated) - tbd Length - 2.680 Design velocity - 2,500-3,000 Material - UNSC36000 brass Sold in a packages of 50 at $95.00/box. Shipping via USPS Priorty Mail to the 50 states is included in the price. We can only ship .510 diameter bullets to a US address.