The .510 Match BoreRider, Heavy is a premium match bullet with a front etching band diameter is 0.502 and the rear driving band diameter is 0.5105. This heavy, 815 grain bullet has demonstrated excellent match accuracy . Weight - 815 grains BC (calculated) - 1.128 Length - 2.620 Design velocity - 2,500-3,000 Material - UNSC36000 brass Sold in a packages of 50 at $95.00/box. Shipping via USPS Priorty Mail to the lower 48 states is included in the price. We can only ship .510 diameter bullets to a US address.

The 750 Grain High Velocity Hunting bullet was three years in development. Yes, it is rocket science. The bullet is designed for match accuracy and has a controlled fracturing hollowpoint cavity that is effective over a wide of velocities. The bullet is designed for those shooters choosing to use H50BMG and 5010 powder. The bullet is made to the same exacting standards as our other match bullets. This bullet can be magazine fed. Weight - 750 grains BC (calculated) - 0.880 Length - 2.380 Design velocity - 2,500-3,000 Material - UNSC36000 brass Sold in a packages of 50 at $112.50/box. Shipping via USPS Priorty Mail to the 50 states is included in the price. We can only ship .510 diameter bullets to a US address.

I just had to try it! I call these bullets hogwhoppers and they have stopped everything from charging groundhogs and cape buffalo to elephant. The unique nose was designed to create a tremendous impact force and then track straight and deep. The radial cutting edges keep the wound channel from clogging for a continuous blood trail, but I doubt if you will have to track anything! Weight - 440 grains BC (calculated) - 0.208 Length - 1.130 Design velocity - 1,600-2,700 Material - UNSC36000 brass Sold in a packages of 50 at $80.00/box. Shipping via USPS Priorty Mail to the 50 states is included in the price.

The .510 Subsonic Controlled Fracturing was designed for outstanding terminal subsonic performance for suppressed bolt gun or single shot applications. The required barrel twist rate for stability with a muzzle velocity of 1,050 fps is 1:10. Testing has shown terminal performance is dramatically improved by inserting a .243 diameter payload bullet (not included) into the hollowpoint cavity. The hollowpoint was designed with a light .243 slip fit and the payload bullet can be retained with a small amount of epoxy. A payload bullet should be selected that does not extend greater than .100 out of the nose. The function of the payload bullet is to shift the cg forward and to direct the hydrostatic energy outwards accelerating the expansion. Weight - 639 grains (without payload bullet) BC G1 1,050 fps (calculated) - X.XXX Length - 2.000 Design velocity - 1,050 Material - UNSC36000 brass Sold in a packages of 50 at $110.00/box. Shipping via USPS Priorty Mail to the 50 states is included in the price.

NOTE: Orders received the week of 4/26/10 will ship on 5/1/10. Through extensive testing and customer input, we have designed a replacement breech plug and primer carrier for the Knight DISC Extreme and DISC Elite muzzleloaders. This new design nearly eliminates blowback while providing instant ignition with Blackhorn 209. The breech plug is sold as a kit consisting of the breech plug, 209 primer carrier, and two vent liners. The standard Knight bolt is used, gun alterations are not required. The breech plug and primer carrier are produced from 17-4 stainless steel vacuum hardened to specification H900. 17-4ss offers high strength with outstanding corrosion resistance. The replaceable vent liners are produced from a mil-spec steel and vacuum hardened in a proprietary heat treat process that maximizes toughness to flame erosion. Due to Knight manufacturing variances and model differences, this kit may not fit the Knight Longe Range Hunter, Master Hunter, Master Hunter Cryogenic, DISC Original with the DISC Extreme conversion update, or the Green Mountain 54-120. Sold in a package 1 kit for $39.50 delivered. Shipping via USPS priority mail to the 50 states is included in the price. Please allow 7-10 days for shipping from the order date.

Special Shipping Charges

Direct replacement vent liner for the Savage MLII muzzleloader and all Lehigh breech plugs. The domed head and computer modeled internal design improve combusion efficiency and consistency resulting in reduced velocity variation and less ignition fouling. Vent liners are produced from a MIL-spec steel alloy and are vacuum heat treated to a proprietary multi-step process to extend life. The deep 7/64 inch hex allows for easy removal without stripping. Sold in a packages of 4 for $20. Shipping via USPS to the 50 states is included in the price. Note, the vent liners ship via USPS first class mail in a padded mailer. Please allow 10-13 days for shipping from the order date.

40 vent liners. Price includes shipping.